Table of Contents
Advertisement
Cleaning and Maintenance
Clean the projector regularly to keep it working properly. The external surface can be wiped
clean with a soft cloth as required.
The air filter must be cleaned every three months (more frequently depending on use or
environment). If the projector gets very hot, clean or replace the air filter immediately to
avoid damage.
. Turn off the projector and unplug from the supply before cleaning.
. Do not use any harsh detergents or solvents for cleaning.
. If the projector is still overheated after cleaning, or if there is any damage to the filter,
it must be replaced before further use.
. Make sure the air filter is not obstructed and that it is fitted properly after cleaning.
To clean:
1. Open the filter cover and remove the filter.
2. Remove the dust by tapping it gently on both sides.
3. Use a vacuum cleaner to clean any remaining dust.
4. Replace the filter and close the cover.
22
Advertisement
Table of Contents
