Harbor Freight Tools ROCK CRAWLER Owner's Manual

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2019 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

19e

Table of Contents

Need help?

Do you have a question about the ROCK CRAWLER and is the answer not in the manual?

Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
Page 2 12. Maintain product labels and nameplates. not use swollen or leaking batteries. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Assembly Unpacking 1. Carefully slide the cardboard support 3. Remove the Truck from the cardboard. If containing the Truck out of the packaging.
Page 3 Installing Batteries Remote 1. Unscrew and remove the battery 3. Replace the Remote battery cover cover on the back of the Remote. and screw it on securely. 2. Insert two AA batteries (not included) into battery compartment, following indicated polarity. Truck 1.
Page 4 Note: Replacement parts are not available. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

56514