Teddington TCX Instruction Manual page 21

AIR CURTAIN CONFIGURATION
The name and fundamental settings for each individual device can be changed in this section.
Name
Fan model
Automatic speed control
Electronic air discharge temperature control
Group assignment
ROOM SENSOR SELECTION
Options for recording the room temperature.
Internal sensor display
External sensor device
External thermostat device
ALIGNMENT OF ROOM SENSOR
The display value can be calibrated here when there is a significantly different room temperature.
ACTIVATE THE SUMMER / WINTER FUNCTION
Switch the summer / winter function on or off. If this is switched on, you can select between
summer and winter function on the home screen. If the function has been switched off, a symbol
is no longer shown on the home screen.
AUTOMATIC SUMMER / WINTER CHANGEOVER
Stand 21.08.2019
Air discharge temperature control reinforcement Kp
Air discharge temperature control reset time Tn
Sensor in control element is active
PT 1000 sensor connected as external sensor
Room thermostat / switch connected
Off
No automatic switchover
T-outdoor
Switch from summer to winter using an external sensor
Ext. input
Switch from summer to winter using an external contact
Change the name of the device
Information about AC or EC technology
Select between:
Manual speed specified by the control
Off
element
T-outdoor Fan level regulated by outdoor temperature
T-room Fan level regulated by room temperature
Infrared Fan level by IR sensor (special function)
0-10 V External signal specifies fan level
4-20 mA Alternative to 0-10 V, identical function
Mixer movement duration Valve run time [s]
Proportional control parameter
[%]
Integral control parameter [s]
Mixer closed when off On or off
20