Table of Contents
Advertisement
OXY 70
The Future Starts Now
10. Datalogger function
10.1 Save the data Manually
When the reading is stable, press the
key, the display shows the M+ icon together with the number
of the memory, and the reading is saved in the memory.
The function of manually saving does not work if you set a capture range. Set "00.00" in the parameter
P6.3 of setup menu to disable Auto data logging.
10.2 Save the data Automatically
Set the acquisition interval in the parameter P6.3 of setup menu, the display shows the
icon at this
point the instrument is ready for automatic recording. When you press the
button (short press), the
display will flash the
icon and the instrument starts recording the values at the interval chosen.
To stop automatic recording, press the
button, the
icon stops blinking.
10.3 Recall of the saved data
During measurement press
to recall the last saved memory. The meter will show RM icon and the
number of the saved data. Press
and
keys to scroll between the memory, long press these
keys to speed up the scroll.
To exit from memory recall and return to measurement press
button once.
10.4 Clear Memory
To clear the memory go to the parameter P6.7 of setup menu, select YES and confirm with
key.
Before emptying the memory make sure you have already downloaded the data on your computer.
12
Advertisement
Table of Contents
