Subscribe to Our Youtube Channel
Related Manuals for Pima SAT-N
Summary of Contents for Pima SAT-N
- Page 1 SAT-N Universal PSTN to Ethernet & GSM/GPRS Communicator Installation Guide P I M A E l e c t r o n i c S y s t e m s L t d .
- Page 2 SAT-N Installation Guide...
-
Page 3: Table Of Contents
Notes ........................... 11 Limited Warranty PIMA Electronic Systems Ltd. does not represent that its product may not be compromised and/or circumvented, or that the Product will prevent any death, personal and/or bodily injury and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the Product will in all cases provide adequate warning or protection. - Page 4 SAT-N Installation Guide...
-
Page 5: Introduction
Network, using the net4pro module SAT-N can be used as a backup to the phone line, or it can be used where there is no phone connection. The communicator can be triggered by a PGM output, or by a phone dialer. -
Page 6: Quick Reference Guide
(and programmed by COMAX as In this way, the SAT-N can be used for split reporting, where reports to one CMS will be via the phone, and reports to the second CMS will be via GPRS or Ethernet. PGM, one-time transmission When SAT-N is connected to a phone line, it can be used to transmit only certain events or zones via GPRS or Ethernet, by triggering its PGM input. -
Page 7: Report Codes
Modes of Operation Report codes SAT-N uses the following events to report the CMS over GPRS and Ethernet Event Function Description Module An event for sending supervision reports. Different interval times can be set supervision for the GSM-200 and the net4pro. -
Page 8: Installation
SAT-N Installation Guide Installation Connect the SAT-N according to your desired setup. Follow the next diagram and table. Do not connect the SAT-N to power before installation is complete. How to connect the SAT-N Phone jack GSM-200 SAT-N To the... -
Page 9: How To Program The Sat-N
Connect the DPU’s USB plug to the Laptop/PC Connect the phone cable between the two connection boxes Connect the serial connector to a connection box on one side, and to the SAT-N on the other SAT-N configuration in COMAX In COMAX (upload/Download manager), open a new SAT-N account. The screen includes the parameters of the SAT-N, the GSM-200 and the net4pro. - Page 10 Tamper report Alarm code for case’s tamper switch. Default code: 137 code SAT-N phone 4-digit number for triggering the SAT-N by a dial from alarm system number The GSM-200 parameters The following table describes the parameters of the GSM-200. Parameter...
-
Page 11: Notes
Use GPRS SIM card (recommended). When too many zones report at once, a communication error can occur. We recommend not sharing the PSTN line with any other appliance. PIMA Electronic Systems Ltd. WWW.PIMA-ALARMS.COM 5 Hatzoref Street, Holon 5885633, Israel Tel: +972.3.6506414 Fax: +972.3.5500442... - Page 12 SAT-N Installation Guide P/N: 4410324 *4410324* Revision: A3, XX en, May 2017...
Need help?
Do you have a question about the SAT-N and is the answer not in the manual?
Questions and answers