PB Dorm Over-the-Door Mirror Rack Assembly Instructions

Over-the-Door Mirror Rack
Parts:
A B C
Screws Mirror
6 PCS 1 PC
Tools: Phillips screwdriver.
Assembling product:
1. Open wire bin and assemble canvas bin with wire bin as shown in below photos.
1. Attach the mirror (B) to the wire hook (C) by aligning the mirror
holes with the two threaded holes and secure the mirror using
2 x screws (A) and a screwdriver.
2. Attach 2 hooks (D) to the mirror (B) by aligning the hook
holes with the two threaded holes and secure the hooks using
4 x screws (A) and a screwdriver.
3. Attach the 3M Velcro on the back of the mirror.
Clean the surface with isopropyl rubbing alcohol, wipe gently, let dry.
Do not use household cleaners. Separate strips. Press fasteners
together until they snap. Remove one red liner. Position the set
of strips on back of mirror and press firmly. Remove remaining
red liners. Press firmly for 30 seconds.
D E
Wire hook Hook Large wire
1 PC 2 PCS
F
Small wire bins
bins
2 PCS 2 PCS
G H
Large canvas Small canvas
bins bins
2 PCS 2 PCs
I
3M Velcro
1 SET