Initial Setup - Instant POD Multi-Pod 68 MB User Manual

Initial setup

Coffee is always a good idea, so let's get this little guy going!
01
Pull your new coffee maker out of the box.
02
Remove all the material, adhesive strips and loose parts from
in and around the appliance.
03
Place the coffee maker on a stable, level surface.
04
Lift off the water tank, then remove and discard the red plug.
Place the water tank back on the base and press down to secure it.
The sticker on the water tank may be removed.
05
Slide the drip tray into place beneath the front of the coffee maker
06
Follow the instructions in Initial cleaning before using the coffee
maker for the first time.
DO NOT remove safety warning stickers from the appliance.
Read the Important
Safeguards before using
the appliance. Failure
to read and follow those
instructions for safe use
may result in damage to the
appliance, property damage
or personal injury.
| support@instantappliances.com | 1-800-828-7280
10
CAUTION
DO NOT place the
appliance on a stovetop.
Heat from an external
source will damage the
appliance.
DO NOT block the vents
on the bottom of the
appliance.