Launch Value-200 Instruction Manual page 23

Select BOTTLE TEMPERATURE and press the ENTER key to confirm:
Check that the temperature shown on the display is that also read on the external
thermometer. If necessary, press START to modify the machine value:
Type in the temperature read on the digital thermometer and press ENTER to confirm.
Replace the temperature probe on the bottle.
SETTINGS
LANGUAGE
Switch the machine on. The MAIN MENU will appear after a few seconds:
Select NEXT MENU:
Select DATA AND CONFIGURAT. :
Select CONFIGURATION:
Select LANGUAGE:
INSTRUCTIONS MANUAL
<BOTTLE SCALE >
OIL SCALE
BOTTLE TEMPERATURE
BOTTLE TEMPERATURE
XX.X °C
START to change
STOP to exit
BOTTLE TEMPERATURE
XX.X °C
XXX.X °C
Press START
AUTOMATIC PROCEDURE
ASSISTED PROCEDURE
NEXT MENU
Gas Avail xxxxx g
CALIBRATION
DATA AND CONFIGURAT.
SERVICE ALARM
BOTTLE FILLING
DATA
CONFIGURATION
SERVICES
PREVIOUS MENU
LANGUAGE
MEASURE UNITS
OPTION
PREVIOUS MENU
-23-