GoPro Hero7 White Quick Start

Find the full manual at: www.cadl.org/gopro

SETUP

INSTALLING YOUR MICRO SD CARD

1. Hold down the Latch Release button on
the side door, then slide the door open.
Please refrain from forcing the door.

CHARGING THE BATTERY

1. Hold down the Latch Release button on
the side door, then slide the door open.
Please refrain from forcing the door.

POWERING ON

Press the Mode
button to turn on the
HERO7 White.
The GoPro App is available
free for iPhone or Android. It
is not required to use the
GoPro.
2. With your camera off, insert the SD card
into the card slot with the label facing the
USB port.
You can eject the card by pressing it into the
slot with your fingernail.
2. Connect your camera to the USB charger
provided using the included USB-C cable.
It takes about 2 hours for the battery to fully
charge.

POWERING OFF

Press and hold the
Mode button to turn
it off