Yamatake VBC7000 Series Installation Manual

VBC7000 Series
Seismic Detector
Installation Manual
Thank you for purchasing the VBC7000 Series
Seismic Detector.
This manual contains information for ensuring
the correct use of the VBC7000. It also provides
necessary information for installation, maintenance,
and troubleshooting.
This manual should be read by those who design and
maintain equipment that uses the VBC7000. Be sure
to keep this manual nearby for handy reference.
Please, read the 'Terms and Conditions' from the
following URL before order or use:
http://www.yamatake.com/products/bi/order.html
NOTICE
Be sure that the user receives this manual before the
product is used.
Copying or duplicating this manual in part or in whole
is forbidden. The information and specifications in the
manual are subject to change without notice.
Considerable effort has been made to ensure that this
manual is free from inaccuracies and omissions. If
you should find an error or omission, please contact
Yamatake Corporation.
In no event is Yamatake Corporation liable to anyone
for any indirect, special or consequential damages as a
result of using this product.
©2009 Yamatake Corporation ALL RIGHTS RESERVED
CP-UM-1713E
• Before wiring the VBC7000, be sure to turn the power
off. Failure to do so might cause electric shock.
• Be sure to read the installation manual before using
this device. Improper use could result in damage to the
device or equipment, and may cause bodily injury.
• Do not install the device in places below. Faulty
operation, fire, or explosion could result.
•
•
•
•
•
•
•
• Do not use this device as a step, or subject it to
unreasonable force. Product damage or user injury
could result.
• To avoid malfunction, never remove the cover.
• Make sure that the locking screw is fastened before
transporting the device. Otherwise the sensor may be
damaged by vibration or impact.
• Do a functional check at least once a year, and check
the Gal response level at least once every three years.
1. Overview
The VBC7000 series seismic detector can be installed
in industrial or workplace environments to prevent
secondary damage in the event of an earthquake by
preventing the release of harmful gases, performing
emergency shutdown of equipment, activating an alarm,
etc.
Main Features
■ ■
•
•
•
•
1
WARNING
Warnings are indicated when mishandling this
product might result in death or serious injury.
CAUTION
Cautions are indicated when mishandling this
product might result in minor injury to the user,
or only physical damage to the product.
WARNING
CAUTION
On a steep incline
In a place that is normally subject to vibration, or that
receives shock from an opening and shutting door,
etc.
Where the temperature or humidity is high
Where there is water droplet spray or excessive
dampness
In a place subject to magnetic fields
Where there is dust or corrosive gas
Where there is flammable or explosive gas
Depending on the intended use of the detector, fifteen
models are available for accelerations from 12 to 250 Gal.
Faulty activation is minimized as the unit's construction
makes it difficult for it to be activated by non-earthquake
high frequency vibrations from sources like machinery or
dump trucks.
Functional checks can easily be performed after mounting
or installation.
The operating status can be checked visually in the
indication window, which changes from green to red
when the detector is activated.