Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Gradus Group GABOR FM-LPM
Summary of Contents for Gradus Group GABOR FM-LPM
- Page 1 LOW-PROFILE FIXED WALL MOUNT for Flat-Panel Screens User Manual...
- Page 2 Thank you for choosing Gabor. The Gabor Low-Profile Fixed Wall Mount Series, available in 3 sizes, offer durable and discreet wall supports for displays measuring 30 to 90 inches and can hold a maximum weight ranging from 75 to 130 pounds. This low-profile mount offers a mounting depth of 1 inch (25 mm), ensuring that your display will hang nearly flush against the wall.
-
Page 3: Safety Warnings
Safety Warnings • Do not use this product for any flat-panel monitor device other than what • It is recommended that at least 2 people perform the installation process it is intended for; the exact specification, size parameters, and weight to prevent injury from mishandling or dropping of the product and/or limits are found both on the product box and in the instruction manual. -
Page 4: Product Specifications
Product Specifications Depth from Mounting Source Material 1 in. (25 mm) Steel Recommended Screen Sizes Weight FM-LPM: 30-50 in. (76.2-127 cm) FM-LPM: 2.54 lb. (1.15 kg) FM-LPL: 50-70 in. (127-178 cm) FM-LPL: 3.06 lb. (1.39 kg) FM-LPX: 70-90 in. (178-229 cm) FM-LPX: 4.24 lb. - Page 5 Required Tools Hammer 1/8-inch (3 mm) Overview Wood drill bit 25/64-in. (10 mm) 1/2 in. (13 mm) Drill Wall Bracket Concrete drill bit crescent wrench Phillips screwdriver Left Stud finder Tape measure Display Brackets Pencil Right with drawstring latch M8 × 45 mm screw for M4 ×...
- Page 6 Display/TV Placement Before installing the Gabor Low-Profile Fixed Wall Mount, you will need to determine the placement of your display and identify surrounding support structures for attachment. The optimal height to position a display is at the viewer'seye level. This can be accomplished in two ways: Measure the distance from the seating area to viewing area.
- Page 7 Attaching the Display/TV Brackets Selecting the Right VESA Mounting Hardware for Your Display A variety of screws are included to fit VESA If the screw is too short, it may not hold standards on the backs of most displays. the display. If it’s too Select the M4, M5, M6 or M8, screws and long, it may damage washers that best fit your display.
- Page 8 Attaching the Wall Bracket to Wooden Studs Wood studs run vertically inside the wall, 16 inches apart, behind the drywall or plaster. The wall bracket must be mounted to the wood studs, or the bracket could fall out and damage your display or cause personal harm. Three anchor screws are included for use with the FM-LPX, but for the FM-LPM and FM-LPL you will need only two anchor screws.
- Page 9 Wall brackets mounted to wooden studs, with correct screw placement FM-LPM FM-LPL FM-LPX...
- Page 10 Attaching the Wall Bracket to Concrete Warning! Make sure the concrete wall is solid and at least 8 inches (20 cm) thick. If the concrete exhibits cracks or other defects, this may result in failure of the concrete anchors and cause serious personal injury and damage your display. Place the wall bracket up to the location marked for your display, and use a pencil to mark three drilling holes for the concrete anchors.
- Page 11 Mounting the Display on the Wall Bracket Important! We recommend that two people perform this step. Lift your display up to the wall bracket, and hang it from the top hooks of the display's brackets until the latchs click secure. Removing the Display from the Wall Bracket Important! We recommend that two people perform this step.
-
Page 12: One-Year Limited Warranty
For more information or to arrange service, visit www.madebygabor.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com Gabor is a registered trademark of the Gradus Group. © 2020 Gradus Group LLC. All Rights Reserved.
Need help?
Do you have a question about the GABOR FM-LPM and is the answer not in the manual?
Questions and answers