Add New Channels
Only for the model supporting the satellite reception
You can add any new channels found automatically to channel list.
1. The signal condition is displayed and press
If you select
Any Satellite
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the
●
locked, the search cannot be executed.
If the status is shown as
●
Strength
have no indications, please check the dish alignment.
2. Select a search mode and press
New channels can only be added to the existing channel list from the
●
same satellite.
in
Auto
Setup, this step is skipped.
Signal Lock
status is shown as Locked. If it is not
Not locked
OK
to start
- 114 -
OK
to access.
and
Signal Quality
/
Add New
Channels.
Signal