■
Other Sat. / Satellite
1. Select
Auto Setup
2. Select the satellite.
Selectable satellites are Astra2/Eurobird,
●
Check the dish alignment for the satellite to select.
●
– The Freesat channel uses Astra2 at 28.2° East and Eurobird1
at 28.5° East satellites. To ensure your satellite dish is correctly
installed, consult your Freesat registered dealer. (UK only)
– For information about
satellite broadcasting companies.
If you want to tune from all available satellites, select
●
3. Select
Start
and press
4. The signal condition is displayed and press
If you select
Any
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the
●
locked, the search cannot be executed.
If the status is shown as
●
have no indications, please check the dish alignment. If the status is
shown as
Not locked
Strength
indicated, select
5. A confirmation screen is displayed and press
6. Select a search mode and press
made automatically.)
If you select
Astra2/Eurobird
●
be searched.
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set
Auto Setup
with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button
and press
OK
to access.
Astra1
and Hotbird, consult the received
OK
to access.
Satellite, this step is skipped.
Signal Lock
status is shown as Locked. If it is not
Not locked
but there are some levels of
Any Satellite
OK
to start
or
Any
- 108 -
Astra1
and Hotbird.
Any
OK
to access.
and
Signal Quality
/
Signal Quality
in step 2 and try again.
OK
to access.
Auto
Setup. (Settings are
Satellite, Freesat channels will also
Satellite.
Signal Strength
/
Signal