Sharp AQUOS Operation Manual page 50

sharp operation manual
>> On-Screen Display Menu
<<
Example
file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/4-27.html?next
System Options (Continue)
Public Mode
2. How to exit from Public Mode setup screen
There are the following ways to quit the public mode setup
screen.
• Turn off the power with the "POWER" key.
• Select "EXECUTE".
3. Public Mode Menu
The guidance is not displayed on screen.
Setup procedure
• Turn off the power with the "POWER" key.
• To move the cursor up and down, use the "cursor
UP/DOWN" key (remote controller) or "CH (
(remote controller and TV set).
• To change the settings, use the "cursor RIGHT/LEFT" key
(remote controller) or "VOL (+)/(-)" key (remote controller
and TV set).
• To save new settings, select "EXECUTE" and press
"ENTER" key (remote controller and TV set).
4. How to use USB clone
This is the function that copying the one TV's user setting to
other TVs or copying previous user setting to itself. Cloning is
available between the same model.
1. Insert the USB memory to TV.
2. Enter public mode.
3. Select "COPY MODE".
4. Then select the "TV→USB [Start]".
5. "USB Cloning Finished." message is displyed when it is
finished , then select "Reset" . TV will restart.
6. Insert the USB which has the data from TV to another TV
or itself.
7. Enter public mode.
8. Select "COPY MODE".
9. Then select the "USB→TV [Start]".
10. "USB Cloning Finished." message is displayed when it is
finished , then select "Reset" . TV will restart.
11. Comfirm the user setting is copied.
ENG 4-27
PUBLIC MODE
POWER ON FIXED
MAXIMUM VOLUME
VOLUME FIXED
VOLUME FIXED LEVEL
RC BUTTON
PANEL BUTTON
MENU BUTTON
AV POSITION FIXED
)/( )" key
ON SCREEN DISPLAY
INPUT MODE START
INPUT MODE FIXED
RC_PATH_THROUGH
PUBLIC MODE
RESET
EXECUTE
COPY MODE
Page 1 of 1
[ VARIABLE ]
[ 100 ]
[ VARIABLE ]
[ 30 ]
[ RESPOND ]
[ RESPOND ]
[ RESPOND ]
[ VARIABLE ]
[ YES ]
[ NORMAL ]
[ VARIABLE ]
[ OFF ]
[ OFF ]
2020/3/25