ORIOLUS BA300S JP version Quick Manual

Portable Headphone Amplifier
BA300S JP version
Quick Guide
■INCLUDED ITEMS
・BA300S JP version
■PARTS AND CONTROLS
Front Side
①
①4.4mm balanced IN jack
④Power charge indicator
■CHARGING THE UNIT
① Turn off the unit.
(The battery charges while the unit is on. )
② Connect the 5v 500mA~ AC adapter or PC.
Charge indicator lights up in red.
Charging is completed in about 3 hours (The time is up to the AC adapter). The indicator turns off
when the battery is completely charged.
■CONNECT THE AUDIO DEVICE
Connect the unit to the device by the 4.4mm balanced IN jack on the front panel.
(The 4.4mm to 4.4mm balanced standard cable is in the box.)
■LISTENING TO MUSIC WITH THE HEADPHONES
① Turn on the unit.
② Connect the headphone to the unit by the 4.4mm balanced standard headphone jack on the front
panel.
■CAUTION ! ! !
We strongly suggest you to follow the steps above while using the unit for protecting your headphones
and your ears. We will not take the responsibility if you take the wrong way in using this unit.

■SPECIFICATIONS

Supported impedance: 8~300Ω
S/N ratio: -111dB
Maximum output: 350mW+350mW (32Ω)
THD+N: <0.02%
Battery: built-in lithium polymer rechargeable battery, approx 7hr battery life
Charging time: approx 3 hours
Size and weight: W57 x H16.5 x D120mm, 165g
Oriolus Japan
www.en.oriolus.jp
・USB Cable ・Adhesive sheet
② ③
②Power switch
⑤Power charge port
・4.4mm to 4.4mm balanced standard Cable
③4.4mm balanced headphone jack
Cyras Co., Ltd.
Zipcode: 110-0016
Address: 5F, Nichiei-intec Okachimachi No.2 BLDG,
3-42-5, Taito, Taito-District, Tokyo, Japan
Tel: +81-(0)3-6869-9631
Oriolus
Rear Side
④ ⑤