Page 1
Vehicle Track 4.8mm x M8 x 30 Bolt Bracket 12.8mm Rivets M8 Washer M8 Spring M6 x 35 Bolt M6 Washer M6 Spring Washer Washer End Cap End Cap Screw Rack Mount Rubber Pad Caps P#: 02THIL15 Page 1 of 4...
Page 2
Installation Guide Ed. 2, 22-02-2018 Tools Required Allan Key Pen & Centre punch for Drill, Drill bit & Blade/Scissors Rivet Gun marking Drill stop Masking Tape Silicone Sealant Vehicle Roof Rack Installation 180mm 280mm Front -Drivers Side Measure from the windscreen edge and mark where to cut rubber Lift rubber strip away from car (it is held on with double sided strip.
Page 3
Apply Silicone Here 370mm Vacuum all swarf from drilling. Repeat steps 6-10 for the passenger side bracket. Apply silicone around rivet holes, press the bracket firmly down and rivet the bracket on (it should have cage nuts). M6x35 Hex Head Screw, Spring Washer, Washer...