Table of Contents
Advertisement
Device name - user-defined device name, if user need to have multiple devices connect to the
server, device name is used for distinction.
Device gate - the default value is "Entrance", it can be set according to the actual installation
environment as Entrance, Exit or Entrance /Exit.
Installation address - equipment installation address defined by user.
2.3.4 Temperature Compensate Setting
Terminal has function of temperature compensation by certain manual calibration using a more
accurate temperature measuring device, such as a mercury thermometer.
After entering system management interface, select the "temperature settings" as shown in the
following figure.
6
Advertisement
Table of Contents
