How To Set The Oven Controls; Setting Digital Clock; Setting The Timer; Setting Microwave Cooking - anko P90N28AP-S3 User Manual

HOW TO SET THE OVEN CONTROLS

 During cooking, if STOP/CANCEL pad is pressed once, the program will
be paused and press START/+30 SEC pad to resume. But if
STOP/CANCEL pad is pressed twice, the program will be canceled.
 After cooking has ended, the system will sound every two minutes to
remind the user until the STOP/CANCEL pad is pressed or the oven door
has been opened.
 When the oven door is opened, if you press START/+30SEC pad to start
cooking, the display will show "door" for 3 seconds to remind user to close
the oven door.
 In standby mode, press the number pads "7", "8" and "START/+30SEC"
pad at the same time to check the version date and the model of PCB

SETTING DIGITAL CLOCK

This is a 12 hour clock.
FOR EXAMPLE: Suppose you want to set the oven clock time to 8:30.
1. In standby mode, press TIMER/CLOCK pad for 3 seconds.
2. Use the number pads to enter the correct time (press number pads 8, 3, 0
in order to enter 8:30).
3. Press START/+30SEC pad again to confirm.

SETTING THE TIMER

1. In standby state or during cooking, press TIMER/CLOCK pad.
2. Use the number pads to enter the desired time. The longest time is 99
minutes 99 seconds.
3. Press START/+30SEC pad to start.
NOTE: You can check the countdown time by pressing TIMER/CLOCK pad,
but if STOP/CANCEL pad is pressed when the display shows the timer, the
function is cancelled.

SETTING MICROWAVE COOKING

1. Press TIME COOK pad.
2. Use the number pads to enter cooking time. The longest time is 99 minutes
99 seconds.
3. Press POWER LEVEL pad once and then press number pad to enter
cooking power level.
4. Press START/+30 SEC pad to start.
10