Tripp Lite DB15 Owner's Manual page 3

Specifications
All surge suppressors listed have component response times of less than 1 picosecond.
Model
DB25
DB25-ALL/DB25-PAR
D10B5
D10B2-T
D10B2
DTWINAX
DCATV
Call Tripp Lite Customer Support at (773) 869-1234 for additional applications requiring Multiport, Terminal Strip, RS422/RS423/RS485 or other interfaces.
Description
Serial DB25 RS 232 protector
(wires 1-8, 20) for male or
female ports of data terminal
& computing equipment including
PCs, printers, modems, etc.
Male/Female genders are
reversible with reversible
thumbscrews.
DB25-ALL: Serial DB25 RS232 18 volts, protecting pins
protector (pins 1-25) for any 25 1-25 and chassis
pin male or female DTE/ DCE
ports. Male/Female genders are
reversible with reversible
thumbscrews.
DB25-PAR: Parallel port
DB 25 protector (pins 1-25).
10Base5 thick coax protection 7.5 volts, protecting center,
with "N" type male/female
connectors.
10Base2 thin coax protected
"T" (BNC f/m/ f). Also protects
IBM 3270 and CCTV lines.
10Base2 thin coax protector
(BNC m/f). Also protects IBM
3270 and CCTV lines.
Twinaxial AS400 Sys3x
protector (m/f).
Coaxial protector for
TVs, VCRs, pro video
supplied by CATV
("F" m/f).
3
Nominal Clamping
Voltage
18 volts, protecting
pins 1-8, 20 and chassis
7.5 volts, protecting pins 1-25
and chassis
shield and chassis
7.5 volts, protecting center,
shield and chassis
7.5 volts, protecting center,
shield and chassis
10 volts, protecting both signal
lines, shield and chassis
7.5 volts, protecting center
and shield conductors
Peak Pulse
Current
340 amps
340 amps
750 amps
750 amps
750 amps
750 amps
500 amps
750 amps