Page 2
Dear Valued Customer Thank you for choosing Klemsan Marking Solutions. Klecard is the perfect all-in-one solution that using thermal transfer printing technology to produce professional looking industrial marking labels. A wide variety of products are available in our range, suitable to mark terminal blocks, cables and any other component inside and outside the electric panels.
Page 3
Klemsan reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Klemsan reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Klemsan to notify klemsan.com Klemsan Website any person or organization of such revisions or changes.
Control Panel ............................11 Certification Back of the Printer ..........................12 Print resistance CEI 16-7, EN 60950-1, EN 61010-1, EN 60464-2 Sensors of the Klecard ...........................13 Dimensions 393 (L) x 230 (W) x 244 (H) mm Operating of the Klecard Printer........................14 Weight 9,5 Kg Energizing the Printer ..........................15...
Klecard can operate only with its original positioning plates. With these plates, you can print all kind of Klemsan If you ever need to transport the Klecard and any of its parts in the future, saving the carton box and packaging labels.
Printer ON, Plate on the tray No plate on the tray but no media placed Klecard has an LCD screen on which you can read the necessary controls and settings. The on/off button is used to energize the Klecard 22...
Serial Number. range of +15°C and 35°C. If the temperature of room is too cold or too warm, the Klecard will not operate and a message will appear on the Refer to that Serial Number for servicing.
Klemsan Klemsan Energizing the Printer Operating of the Klecard Printer Printer Information Power Port Klecard 22 When the printer shows the USB Port Ready message READY, you can print your job. USB-B Please, follow the steps below to set up your printer.
Klecard with flat media plate plate The plates of the Klecard have a unique shape which helps you to place easily them on the tray. 3 - Place the media/label on the plate. IMPORTANT The terminal block and cable marker cards fit the proper plate by placing into plate holes; the flat medias place by attaching them to the two fixing pins on the tray by the help of label holes on top.
Intensity / Darkness Control Cleaning the Exterior The Klecard printer can operate in a large range of room temperature. Wipe the exterior of the printer with a dry cloth frequently. The sensor on the printhead detects the room temperature and optimizes the parameters to the default setting level.
2 - Use a small amount of absolute ethanol or IPA(isopropyl alcohol) for cleaning. When the ribbon is missing or finished, the Klecard appears as the picture Never use cleaners such as acid/alkaline. on the right.
Page 12
After following the steps mentioned at the previous 2 - Align the two 90° notches of the cardboard page, the Klecard printer is ready to operate. core metal pins on the supply roller. Now you can place the plate and the media on the tray.
If the white line or flaws remain after cleaning the printhead, it means that there is a damage of the heater elements. #214 #215 : Turn off the Klecard, then turn on again. If the messages remain, please contact with the Klemsan In this case you need to replace the printhead.
These two labels are sticked to the printer to advice the users from risks. Do not disassemble the printer parts or use them for a different purpose. All service procedures should be performed by Klemsan. Do not service the printer with the power cord plugged into the outlet. Sticked to the cog...
NOTES Warranty Klemsan warrants, to the original end user only, most parts of the Klecard printer for two years, according to the following terms: • Klemsan will replace or repair, at Klemsan discretion, Klecard’s non-consumable parts which were found as de- fective during the warranty period.
Page 16
Russian Federation Africa & Middle East Tel : +90 530 401 94 62 Gsm : +48 51 666 51 41 PJSC KLEMSAN 127566, 44, Altufevskoe Mail : aliabostiet@klemsan.com.tr Mail : ayhankanal@klemsan.com.tr shosse, Moscow, Russian Federation Tel : +7 495 720 67 71 Mail : russia@klemsan.ru...
Need help?
Do you have a question about the KLECARD and is the answer not in the manual?
Questions and answers