Shark IQrobot Quick Start Manual

Please be sure to read the enclosed Shark
STEP 1 SET UP THE ROBOT
Remove all plastic films before use. Robot may take up to 15 seconds to
turn on. Robot will say "Hello, let's get cleaning" when ready to use.
Attach side brushes.
STEP 3 CHARGE THE ROBOT
Place the robot 2 feet away from
the dock, then press the Dock
button on the robot.
Docked and Charging: Battery and
Base indicator lights will turn blue.
Charging is complete: on the
robot will illuminate steadily in blue.
For assistance, visit us online at sharkclean.com or contact us at 800-798-7398
©2019 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. SHARK CLEAN and SHARK IQ ROBOT are trademarks of SharkNinja Operating LLC.
APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other
countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
I
Press switch to to turn on power.
Owner's Guide prior to using your robot.
®
QUICK START GUIDE
STEP 2 SET UP THE DOCK
Place the dock in an open, central location,
with its back against the wall. Connect
the cord to the port on the back. Plug the
cord into an outlet, and the indicator light
on the dock will turn green.
For best results, set
up the dock on bare
floor or thin carpet.
STEP 4 DOWNLOAD THE SHARK CLEAN™ APP
Scan the QR code, or search for
Shark Clean
in the app store and
download the app to your device.
See other side for pairing instructions.
To send your robot into action without
using the app, simply press the Clean button.
3 ft.
3 ft.
5 ft.
RV1000_QSG_MP_Mv14