Setting up Avaya IX
camera
About this task
You can use the Avaya IX
XT7100. The HC camera has embedded microphones which by default are active as the audio
source input of the XT codec.
Note:
Camera presets are not accessible using the XT remote control. It is possible to store and
recall presets using the camera remote control.
Before you begin
Connect the power cable, see
Procedure
1. Plug the USB Type-B connector into the USB Type-B socket at the rear of the camera.
2. Plug the USB Type-A connector into the upper USB Type-A socket at the rear of the XT
Series endpoint (XT4300, XT5000 or XT7100).
3. Remove the lens cap. You can use the lens cap for privacy.
May 2020
Setting up Avaya IX
™
Huddle Camera HC050 as the main
™
Huddle Camera HC050 as the main camera on XT4300, XT5000, and
Setting up Avaya IX Huddle Camera HC050
XT Series Codec Unit
™
Using Avaya IX
Comments on this document? infodev@avaya.com
™
Huddle Camera HC050 as the main camera
Plug the USB
connector into
the upper
USB socket
Huddle Camera HC050
on page 10.
11