Chapter 4: Setting Up Avaya Ix Huddle Camera Hc050 - Avaya IX HC050 User Manual

Chapter 4: Setting up Avaya IX Huddle
You can use the Avaya IX
XT7100 or as a USB camera for your Avaya IX
Connecting the power
1. Plug the C13 end of the power cable into the power cable transformer.
2. Plug the AC adapter into an AC outlet and the DC 12V power connector into the DC 12V
socket of the camera.
The power indicator on the front panel lights up.
After the camera is powered on, it starts to initialize. It tilts to the top limit position and then
both horizontal and vertical before stopping at the middle position. The motor stops running
and the initialization is completed.
Note:
If the position preset 0 has been stored, it is the camera's default position.
Related links
Setting up Avaya IX Huddle Camera HC050 as the main camera
Setting up Avaya IX Huddle Camera HC050 as a USB camera for your Workplace Client or
Spaces client on page 12
May 2020
Camera HC050
™
Huddle Camera HC050 as the main camera on XT4300, XT5000, and
Using Avaya IX
Comments on this document? infodev@avaya.com
™
Workplace Client or Avaya IX
on page 11
™
Huddle Camera HC050
™
Spaces client.
10