INSTALLATION INSTRUCTIONS
ICU Sink System
Models: 9118.111, 9118.100 & 9118.150
Introduction: Thank you for selecting our products...products which have been the
benchmarks of fine quality for years. To help insure that the installation process will
proceed smoothly, please read these instructions carefully before you begin. Also,
review the recommended tools and materials list; carefully unpack and examine your
new plumbing fixture.
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID DAMAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
Recommended Tools & Materials
Pipe Wrench
Level
Channel Lock Pliers
Rough-In
Dimensions
14-3/4"
(375mm)
40-1/8"
(1020mm)
26-1/8"
(663mm)
*DISCLAIMER: Faucets with a base diameter greater than 2-1/4" (57 mm) will not fit on this
ICU Sink. The Selectronic ICU Faucet was specifically designed to minimize splashing during
operation. American Standard will not be liable for any splashing that occurs if faucets other
than the American Standard ICU Faucets are used.
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .
© A S A m e r i c a , I n c . 2 0 1 2
Adjustable Wrench
Drill
20"
(509mm)
4-3/4"
(121mm)
17"
(432mm)
5/8"
(14mm)
8"(203mm) BETWEEN
MOUNTING HOLES
*
FAUCET PERCH
2-1/2" DIA. (65mm)
36-1/2"
(927mm)
36"
(914mm)
Plumbers' Putty or Caulking
Tubing Cutter
Phillips Screwdriver
*
FAUCET PERCH
2-1/2" DIA. (65mm)
36-1/2"
(927mm)
9/16" DIA.
2-3/4"
(14mm)
(70mm)
2-3/4"
(70mm)
4"
4"
(102mm)
(102mm)
1
Tape
Measure
Torch
Regular Screwdriver
1-5/8"
(41mm)
RECOMMENDED CARRIERS:
JAY R. SMITH MFG. CO.
MODEL SQ-0-4437
FLOOR MOUNTED SINK SUPPORT
WATTS CA-311
FLOOR MOUNTED URINAL CARRIER
Hacksaw
Pencil
7301793-100 Rev. C