Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
1
Preparing the Machine
No Parts Required
Procedure
1.
Move the machine to level ground and set the
parking brake.
2.
Lower the cutting units to the ground.
Description
Latch support
Latch bracket
Lock Assembly
Bolt (5/16 x 1-1/4 inches)
Safety decal (106-6754)
Qty.
-
Prepare the machine.
1
1
1
Install the hood-lock assembly (Kubota
models).
1
2
3
1
1
1
Install the hood-lock assembly (Yanmar
1
models).
2
2
3
1
1
Install the floor-plate-lock assembly
(2008 and after models).
2
2
1
2
Install the hood handle.
2
1
2
2
Install the belt covers.
2
1
Secure the seat plate.
1
1
Install the decals.
1
3.
Shut off the engine, wait for all moving parts to
stop, and remove the key.
4.
Unlatch and raise the engine hood, and secure
it in the raised position with the prop rod.
2
Use