Summary of Contents for Creative Play NURSERY STORYTELLERS CHAIR
Page 1
NURSERY STORYTELLERS CHAIR Assembly Instructions IMPORTANT - If foundation are required support legs will be have been extended 450mm REF: CP058/NST NURSERY STORYTELLERS CHAIR pg 1 of 9...
To be used to secrure seats onto tarmac PLEASE BE AWARE some images shown are of STANDARD STORYTELLERS CHAIR: All measurements however are specific to the NURSERY STORYTELLERS CHAIR TOOLS required pg 3 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Foundation Details SOIL TIMBER SUPPORT POST CONCRETE pg 4 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Page 5
If the bench IS pre-assembled JUMP TO STEP Attach T1 timbers to T6 timber Using 40mm brass screws 950mm (start of the curve on the T1 timber) - 5mm gap between T1 timbers pg 5 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Page 6
T5 timbers View from BELOW Attach the SEAT to the BACK Using 120mm brass screws Outer face of T2 timbers & T1 timbers are flush/level with each other pg 6 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Page 7
Screw T3 timbers to the T4 timbers (arm rests) Using 80mm & 120mm brass screws 80mm brass screw Arm rests sit 120mm brass screw against the T1 timbers Screw as shown above pg 7 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Page 8
SUPPORT - Use 40mm brass screws to attach angle cleat to the support legs - Use expansion bolts or EXCALIBUR bolts to secure the bolts to the concrete / tarmac pg 8 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Page 9
CUT-OUT OPTION AVAILABLE CUT-OUT OPTION The CUT-OUT option is identical to the ‘standard’ version The T1 timbers have had SIMPLE circles and 1 x STAR ecut out pg 9 of 9 REF: CP058/NST NURSERY STORYTELLERS CHAIR...
Need help?
Do you have a question about the NURSERY STORYTELLERS CHAIR and is the answer not in the manual?
Questions and answers