Chevrolet Corvette 2020 Owner's Manual page 47

46 Phone
Pairing a Phone
1. Make sure Bluetooth has been
enabled on the cell phone
before the pairing process is
started.
2. Touch the Phone icon on the
Home Page or the phone icon
on the shortcut tray near the
bottom of the display.
3. Touch Phones at the top of the
infotainment display. There is
also a Connect Phones option
in the middle of the Phone
display which will shortcut to
the Phone List menu.
4. Touch Add Phone.
5. Select the vehicle name shown
on the infotainment display
from your cell phone s
Bluetooth Settings list.
6. Follow the instructions on the
cell phone to confirm the
six-digit code showing on the
infotainment display and touch
Pair. The code on the cell
phone and infotainment display
will need to be acknowledged
for a successful pair.
7. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
Once the cell phone is paired,
it will show under Connected.
8. If the vehicle name does not
appear on your cell phone,
there are a few ways to start
the pairing process over:
Turn the cell phone off and
then back on.
Go back to the beginning of
the Phone menus on the
infotainment display and
restart the pairing process.
Reset the cell phone, but
this step should be done as
a last effort.
9. If the cell phone prompts to
accept connection or allow
phone book download, touch
Always Accept and Allow. The
phone book may not be
available if not accepted.
10. Repeat Steps 1 8 to pair
additional cell phones.
First to Connect Paired Phones
If multiple paired cell phones are
within range of the system, the
system connects to the paired cell
phone that is set as First to
Connect. To enable a paired cell
phone as the First to Connect
phone:
1. Make sure the cell phone is
turned on.
2. Touch Settings, then touch
System.
3. Touch Phones to access all
paired and all connected cell
phones and mobile devices.
4. Touch the information icon to
the right of the cell phone to
open the cell phone s
settings menu.
5. Touch the First to Connect
option, to enable the setting for
that device.
Cell phones and mobile devices can
be added, removed, connected, and
disconnected. A sub-menu will