Chevrolet Corvette 2020 Owner's Manual page 40

Navigation destinations can be
made in a single command
using keywords. A few examples
are: I want directions to an
address, I need to find a place
of interest or (POI), or Find
contact.
The system responds by
requesting more details. For
other POIs, say the name of a
category like Restaurants,
Shopping Malls, or Hospitals.
Navigating to a destination
outside of the current country
takes more than one command.
The first command is to tell the
system where the navigation will
take place, such as an Address,
Intersection, POI, or Contact.
If Address or Intersection is
selected, the second command
is to say, Change Country.
Once the system responds, say
the country before saying the
rest of the address and/or
intersection.
If POI is asked for, say Change
Location, then Change
Country.
Direct commands might be more
clearly understood by the system.
An example of a direct command
would be Call <number>.
Examples of these direct commands
are displayed on most of the
screens while a voice session is
active. If Phone or Phone
Commands, is spoken, the system
understands that a phone call is
requested and will respond with
questions until enough details are
gathered to make a call.
If a cell phone number has been
saved with a name and a place, the
direct command should include
both, for example Call <name>
at work.
Using Voice Recognition for
List Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list.
When a display contains a list, there
may be options that are available
but not displayed. The list on a
voice recognition screen functions
the same as a list on other displays.
Voice Recognition
Scrolling or flinging can be used to
help display other entries from
the list.
Manually scrolling or paging the list
on a display during a voice
recognition session suspends the
current voice recognition event and
plays the prompt Please select
manually or touch the Back icon on
the infotainment display to try
again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns to the display
where voice recognition was
initiated.
The Back Command
Say Back or touch the Back icon
on the infotainment display to go to
the previous menu.
If in voice recognition, and Back is
spoken all the way back to the
starting display, and then Back is
spoken one more time, the voice
recognition session will cancel.
39