Q U I C K S E T U P S T E P 0 1 Connect the supplied USB cable from your PC to Atom DAC’s USB input jack. S T E P 0 2 Connect an RCA Cable from Atom DAC to your amplifier’s RCA Input jacks.
Page 3
S E C T I O N 2 C O N F I G U R A T I O N Connectivity Atom DAC accepts USB input: 16/44.1k thru 32/384kHz* Maximum RCA Output voltage is 2.0VRMS *Windows 7 supports 24/192kHz maximum...
Listening Tips For maximum signal fidelity, set the DAC to Set sampling rate to the highest integer at least 24-bit audio and adjust digital vol- multiple of your music collection. For ume slightly below 100% at your computer. example, use 176.4kHz for a collection Only control volume from your amplifier.
S E C T I O N 3 S E T U P Computer Setup Atom DAC requires no drivers in Windows 10, Mac OS, Linux, and modern version of iOS and Android. You may download drivers for Win7/8 from jdslabs.com/drivers.
Solution: Install XMOS drivers, as per page 5. Light is off, but USB device is present Cause: Atom DAC is designed to enter standby mode after 15 minutes of inactivity. Solution: Atom DAC will wake up when audio is played.
Page 7
This equipment has been tested and found to Application for Council Directives 2004/108/EC, 2006/95/EC, 2002/95/ comply with the limits for a Class B digital device, EC. Conformity declared for EN55022:2011, EN611000-3-2, EN61000-3- pursuant to part 15 of the FCC Rules. 3, EN55024-2 J D S L A B S .