ENDEAVOUR ETPRO-50W Manual

The ETPRO-50W represents the latest in soldering iron technology. Using
a rechargeable lithium battery, this unit delivers a 50W output suitable for
automotive / industrial applications.
New rapid heat technology generates a 420 degree temperature within 35
seconds. The unit has a 45 minutes continuous runtime. Rechargeable
via mini USB.
Using the supplied cable, insert the Micro USB connector into the end of the
soldering iron, and the USB connector to a wall charger / computer port.

Heat Shrink Instructions

1. Slide soldering iron switch to the ON position and press and hold the power button.
The LED light will illuminate indicating the iron is on.
2. Keep the shrink tip moving back and forth along the length of tube as staying in one place can damage the tube or wire.
3. Continue heating the tube until it is tightly secured to the wire.
When used for soldering and similar applications, this product contains or produces chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
50W Soldering lron Kit
Chisel Soldering Tip
Cap
Cone Soldering Tip
Knurled Nut
Locking Nut
LED Light
Power Button
ON/OFF Switch
Notch
Micro-USB Port
ETPRO-50W
Heat Shrink
Cleaning Sponge
Micro USB Connector
USB Connector
Safety Stand
15 gram Solder
(Tin:60%/Lead:40%)