Acme Packet Net-Net 2610 Quick Installation

Net-Net® 2610/2620 Quick Installation
What's inside the box?
• Net-Net 2610 or 2620
• Power, console cables and
related hardware, rack mounting
kits
Net-Net OS-E and 2610/2620
installation references
• USB Creation and
Commissioning Instructions
• Release Notes
• System Installation and
Commissioning Guide
• Slide Rail Kit Installation
Connect PC or terminal to serial port (ttyS1),
4a
or go to step 4b.
RJ-45
RS-232D Serial B port
DB-9 serial cable
RJ-45 adapter
Console settings: Console settings:
115200 bps 115200 bps
8 data bits 8 data bits
No parity No parity
1 stop bit 1 stop bit
No flow control No flow control
Carefully remove the Net-Net 2000
1
Series from the shipping container,
along with the accessories box.
Connect VGA console and keyboard for
4b
local management.
Keyboard and console ports
1 2
OR Console
Laptop PC
Ethernet port mapping -- Left to right, top to bottom Ethernet port mapping -- Left to right, top to bottom
1 = eth0 1 = eth0 5 = eth4 5 = eth4
2 = eth1 2 = eth1 6 = eth5 6 = eth5
3 = eth2 3 = eth2 7 = eth6 7 = eth6
4 = eth3 4 = eth3 8 = eth7 8 = eth7
Install the chassis in a compatible rack.
2
a. Select the appropriate installation kit
for the type of rack you are using; select
either the slide rail kit or the fixed mount
kit.
b. Refer to the instructions included with
each kit for installation details.
c. Install multiple systems in the rack
from the bottom up.
d. Install the front bezel after
completing Step 6.
5
Keyboard
Web management session
Proprietary & Confidential
Connect the AC power cords.
3
Insert plug end into AC
cable receptacle.
Power receptacle (North America)
or compatible power source
Install network cables for connectivity to
communications servers and the external network.
Remote system management over Telnet, SSH,
and Web.
eth1
eth0
Ethernet
switches
Telnet/CLI session
Internet
AC power cord