Advertisement
Quick Links
VISAGE SCREEN SYSTEM - THREE SIDED (FLAT PACK)
NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff involved
with the installation. Please also refer to the 'Manual Handling Operations Regulations 1992' during the
handling of the product and materials used for installation. The total weight of this product is 53kg (770L) and
65kg (1280L).
TOOLS REQUIRED:
13mm Spanner
Hand Drill with Pozi Drill Bit
10mm x 150mm Masonry Drill Bit
Rubber Mallet
Hammer
KIT CONTENTS:
ITEM A
Side Panel
ITEM B
Front Panel
ITEM C
Side Panel
ITEM D
5mm x 20mm Chipboard Screw
ITEM E
M10 x 120mm Ground Fixing Bolt
ITEM F
Support Leg
ITEM G
Side Skirting (optional)
ITEM H
Front Skirting (optional)
ITEM I
Repair Washer M5 x 25mm S/S
(optional)
NOTE: Some xings apply to the optional skirting
so there may be less xings than stated.
A
F
We recommend that a risk assessment is undertaken to identify an appropriate location for your waste
collection and recycling units. In order to reduce risk, some organisations decide to place the units a minimum
of 5 metres away from buildings. Any potential risk can be further reduced by maintaining a regime of regularly
emptying the unit.
AND MODUS ARE TRADEMARKS OF GLASDON GROUP AND ITS SUBSIDIARIES IN
THE U.K. AND OTHER COUNTRIES.
Replacement components are available direct from GLASDON.
Glasdon U.K. Ltd reserves the right to alter specifications without prior notice.
GLASDON cannot be held responsible for claims arising from incorrect installation, unauthorised modifications or misuse of
the product.
Issue 2
December 2011
© Copyright 2011
TM
ASSEMBLY & FIXING INSTRUCTION LEAFLET
x1
x1
x1
x1
x1
B
G
TM
C000/0406
17mm Spanner
6mm Allen Key
770L 1280L
x1
x1
x1
x1
x1
x1
x29
x33
x6
x6
x2
x2
x2
x2
x1
x1
x16
x20
C
P. 1
x2
x1
Assembled
Three Sided
Screen
(770 L)
FRONT
D
H
Preston New Road
BLACKPOOL
Lancashire FY4 4UL
Tel: 01253 600410
Fax: 01253 792558
E-mail: sales@glasdon-uk.co.uk
Web: www.glasdon.com
SIDE
E
I
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Glasdon VISAGE 770 SCREEN SYSTEM
Summary of Contents for Glasdon VISAGE 770 SCREEN SYSTEM
- Page 1 Replacement components are available direct from GLASDON. Glasdon U.K. Ltd reserves the right to alter specifications without prior notice. BLACKPOOL GLASDON cannot be held responsible for claims arising from incorrect installation, unauthorised modifications or misuse of Lancashire FY4 4UL the product.
- Page 2 Step 1: Assembly of Three Sided Screen Hold panel (B) up to the left hand Using rubber mallet (so not to Tap the top of the extrusion to extrusion on panel (A) ensuring damage the extrusions) tap the ensure the board is level up to the that the feet with the pre-drilled side at the top of the extrusion so top of the extrusion cover cap.
- Page 3 Using hand drill and screw Using rubber mallet, tap the side Using hand drill and 6 o screws at the bottom of the extrusion to provided (D), secure the top xing provided (D), secure the ensure that the board is pushed in position by screwing from the remaining xings on the inside of rmly into the extrusion without...
- Page 4 Step 4: Attaching and Ground Fixing Compulsory Support Legs Three Sided Using a 13mm spanner/socket unscrew the two bolts with Place the support leg (F) up against the washers at the bottom of the outermost extrusions and inside of the extrusion so that the leg remove.
Need help?
Do you have a question about the VISAGE 770 SCREEN SYSTEM and is the answer not in the manual?
Questions and answers