Advertisement
Quick Links
NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff involved
with the installation. Please also refer to the 'Manual Handling Operations Regulations 1992' during the
handling of the product and materials used for installation.
Total weight of the screens are: Two Sided 770 - 40kg
REMOVING SCREEN FROM PALLET:
To remove the screen from the pallet rst make sure that it is in the area where it is to be ground xed (will
be di cult to manoeuvre when o the pallet). Open the door if necessary (see Figs1-3) and using a hand
drill remove screws and washers at the base of each extrusion. Close and lock the door if necessary (Figs 5-6)
then slide or lift the screen from the pallet (will require 2-3 people for assistance).
OPENING AND CLOSING FOUR SIDED SCREEN COMPLETE WITH DOOR:
1
Insert Glasdon Key into lock and
turn anticlockwise to unlock the
door. (Alternatively: Turn twist
lock anticlockwise to unlock
door.)
4
Remove wheeled bin.
NOTE: To allow the wheeled bin to sit inside the screen in the correct position, it is recommended that
the lid of the wheeled bin remains attached and is simply folded over the back of the bin when in use.
For best results please ensure that the front of the wheeled bin is level with the front two extrusions.
VISAGE SCREEN SYSTEM (ASSEMBLED)
TM
OPERATIONAL/FIXING INSTRUCTION LEAFLET
Two Sided 1280 - 46kg
2
Using handle pull door open
to 90 degree position.
5
After replacing the wheeled bin,
remove the door stay catch by
pushing upwards anticlockwise so
that is positioned vertically.
Three Sided 770 - 53kg
Three Sided 1280 - 65kg
To ensure that the door remains
open whilst removing the
wheeled bin, turn the door stay
catch clockwise so that it is
positioned horizontally.
Close the door and insert key into
lock. Turn key clockwise to lock
door. (Alternatively: Turn twist lock
clockwise to lock door.)
P. 1
Four Sided 770 - 80kg
Four Sided 1280 - 92kg
3
6
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Glasdon Visage 770
Summary of Contents for Glasdon Visage 770
- Page 1 (will require 2-3 people for assistance). OPENING AND CLOSING FOUR SIDED SCREEN COMPLETE WITH DOOR: To ensure that the door remains Insert Glasdon Key into lock and Using handle pull door open open whilst removing the turn anticlockwise to unlock the to 90 degree position.
-
Page 2: Tools Required
We recommend that a risk assessment is undertaken to identify an appropriate location for your waste collection and recycling units. In order to reduce risk, some organisations decide to place the units a minimum of 5 metres away from buildings. Any potential risk can be further reduced by maintaining a regime of regularly emptying the unit. - Page 3 Step 3: Attaching and Ground Fixing Compulsory Support Legs Three Sided Two Sided Four Sided c/w Door Using a 13mm spanner/socket unscrew the two bolts with washers at the bottom of the outermost extrusions and remove. (see diagrams above showing location of support legs for all screen types) If the spigot legs have been adjusted (Step 1) the panels will need to remain lifted in position so that the support legs go into the correct holes.
- Page 4 Step 4: Adjustment of Door Wheel on Four Sided Screen c/w Door (If Required) IMPORTANT NOTE: The door wheel must be positioned so that it is touching the ground when the door is CLOSED. The main purpose of the door wheel is to support the large door when in the closed position. If the door is not level, as seen Using 17mm spanner, loosen Using 17mm spanner and 6mm allen...
- Page 5 Replacement components are available direct from GLASDON. Glasdon U.K. Ltd reserves the right to alter specifications without prior notice. BLACKPOOL GLASDON cannot be held responsible for claims arising from incorrect installation, unauthorised modifications or misuse of Lancashire FY4 4UL the product.
Need help?
Do you have a question about the Visage 770 and is the answer not in the manual?
Questions and answers