Table of Contents
Advertisement
111111111111111
IIIIIIIIIII
I IIII Ill
CT1B071A
CT1-B071-A
©
CANON INC.
2018
PRINTED IN
JAPAN
Canon Interchangeable Lens Instructions
These instructions describe important safety notes for Canon
interchangeable lenses* and basic instructions on how to
handle those lenses. For more detailed information, refer to
the instructions for each lens. Instructions for your lens can
be downloaded from the Canon website below:
*EF (EF-S) lenses, EF-M
lenses,
RF
lenses
http://www.canon.com/icpd/
Refer also to the instructions
for
the camera.
Be sure the latest version firmware is installed in the camera.
&,
Warning
Details
pertaining
to
risks
that
may result in death
or serious injury.
• Do not look directly at the sun or other strong
light
sources through a lens or a single-lens reflex camera
with a lens attached. This may result in loss
of sight.
• Do not leave a lens in the sun without the lens cap
attached. The lens may concentrate entering sunlight and
cause a malfunction or fire.
• Do not point a lens at the sun.
Even when the sun does
not appear on the screen, the lens may concentrate entering
sunlight and cause
a malfunction
or fire.
• Where the lens is equipped with a fixed tripod mount and
the lens
is mounted on a camera, make sure to properly
support the
lens.
If you
hold
only the camera, the lens may
fall off
the
camera and cause a
malfunction
or injury.
• Where the lens
is
equipped with a detachable tripod
mount, ensure that the
tripod
mount is securely attached
to the lens body. If
the tripod mount
is
not secure, the
lens
may
fall
off the tripod mount and cause a malfunction or
injury.
~
Caution
Details
pertaining
to
risks
that may result in injury.
• Do not leave
the
product in places exposed to extremely
high or low temperatures.
The product
may
cause burns or
injury when touched.
• Do not insert your hand or fingers into the product. This
may result
in injury.
• When using lenses equipped with Macro Lites, do not
hold
the
Macro
Lites
close
to the
eyes
or
stare at them
when they are illuminated. Doing
so
may result
in eye
damage.
• Only mount the product on
a tripod that
is sufficiently
sturdy.
Attaching and Detaching a Lens
Attaching the Lens
Align the
lens mount
indexes on the lens and the camera body and
then turn the
lens
clockwise.
Detaching the Lens
Hold down the lens release button on the camera and
turn the
lens
counterclockwise.
Refer to the camera's instructions for details on attaching and
detaching a lens.
Shooting Using Autofocus (AF)
•
To
shoot images using autofocus, set AF as the focus
mode.
•
To
shoot images using manual focus, set MF as the focus
mode and
focus
by
turning the focusing
ring.
The procedures for setting the focus mode are explained below.
D
EF
(EF-S)
lenses
and
RF
lenses:
Use
the
focus mode
switch
on the lens
(AF/MF).
D
EF-M lenses: Select the setting on the camera ([AF/MF]).
Canon
@
00
STABILIZER
ON1
r
OFF
@
«
I
H~O»
STABILIZER
MOOE
®
(ciiTI)
2m-6m
C?J
ii/11
1
1~-~
@
©
@)
G)
G)
G)
@
@
Advertisement
Table of Contents
