LG 24TL520U Manual page 16

To use SIMPLINK
(Depending on model)
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.
1 Connect the TV's
HDMI output terminal using an HDMI cable.
2 Select (Settings)
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to [On].
4 Configure the [Auto Power Sync] settings to on or off.
5 In SIMPLINK menu window, selects the device you want to
control.
y You can also set the SIMPLINK in
[SIMPLINK].
y This function is only compatible with devices with the SIMPLINK
logo.
y To use the SIMPLINK function, you need to use a high-speed HDMI®
cable (with CEC (Consumer Electronics Control) feature added).
High-speed HDMI® cables have the No. 13 pin connected for
information exchange between devices.
y If you switch to another input, the SIMPLINK device will stop.
y If a third-party device with the HDMI-CEC function is also used, the
SIMPLINK device may not work normally.
y If you select or play media from a the device with a home theatre
function, the [HT Speaker] (Speaker) is automatically connected.
14
terminal and the SIMPLINK device's
[General] [SIMPLINK].
(Home) [Inputs]
SIMPLINK function description
y Direct Play: Plays the multimedia device on the TV instantly.
y Controlling devices with the TV remote control: Manages the
multimedia device with the TV remote control.
y Main Power Off: If [Auto Power Sync] is set to on in the SIMPLINK
settings and turn off your TV, the devices connected to your TV via
SIMPLINK will also be turned off.
y Main Power On: If [Auto Power Sync] is set to on in the SIMPLINK
settings, turning on a SIMPLINK-linked device will turn the TV on.
(Behavior may vary depending on connected device.)
y [Speaker]: (Depending on model) Select speaker either on the
home theatre unit or the TV.
To set password
(Settings) [Safety] [Set Password]
Sets or changes the TV password.
y The initial password is set to '0000' .
y When France is selected for Country, password is not '0000' but
'1234' .
y When France is selected for Country, password cannot be set to
'0000' .
To return Reset to Initial Settings
(Settings) [General]
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
y When [Lock System] is in place, a pop-up window appears and asks
for password.
y Do not turn off the power during initialization.
To remove the USB device
Select the connected USB HDD from
select the [Eject] button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
y Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
[Reset to Initial Settings]
(Home) [Inputs] and