LG 24TL520U Manual page 10

Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
y Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
y If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
y USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
NOTE
y Supported HDMI Audio format : Dolby Digital / Dolby Digital Plus
(32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96
kHz / 192 kHz) (Depending on model)
8
Connecting to a PC
y Image shown may differ from your TV.
Your TV supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with
a rich bass.
* Plug and Play : The function when a PC recognizes a connected
device that users connect to a PC and turn on, without device
configuration or user intervention.
NOTE
y If you want to use HDMI-PC mode, you must set the [Input Label]
to [PC] mode.
y The OSD (On Screen Display) is displayed on the screen as shown
below.
» When turning the product on in HDMI input.
» When switching to HDMI input.
Is the input connected to your PC?
Do not show message again
y If you select [YES] the size and image quality are optimized for
your PC.
y If you select [NO] the size and image quality are optimized for the
AV device (DVD player, set-top box).
y If you select [Do not show message again] this message does not
appear until the TV is reset. You can change the set value in
(Home) [Inputs] [Input Label].
YES NO