Advertisement
PA-10 2A3 6W Monoblock Amplifier
Description
The PA-10 is a new type of tube amplifier, offering the unique Hagerman self-
balancing output stage. This topology allows the use of unmatched 2A3 power tubes
and requires no adjustments. In fact, it will even run on just one output tube.
Distortion is exceedingly low, especially given the fact that no feedback is used,
thanks to the harmonic cancellation of the output stage, which operates partially in
both single-ended parallel and differential push-pull modes. This balance results in
SET-like musicality yet with PP control and dynamics. The PA-10 is a no-holds-barred
design and pushes the state-of-the-art in vacuum tube amplification.
Package Contents
•
PA-10
•
Power cord
Specifications
Item
Input Impedance
Sensitivity
Output Power
Distortion
Noise
Size
Power
Tube Compliment
Specification
100k ohm
0.95Vrms
6 watts (13 watts into clipping)
0.5% at full power @1kHz
???
10" x 10" x 4"
120Vac 90W
5AR4 x 1, 6E5P x 1, 2A3 x 2
3
Advertisement
