Operating Your Mixer - Sharp EM-S90-BK Instruction Manual

OPERATING YOUR MIXER

Before assembling the mixer, be sure the power cord is unplugged from the
power outlet and the speed selector is in the "OFF" position.
1. Tilt motor head. Depress the tilt/release button, the head of mixer will
automatically release and lift it backwards with hand lightly to lock it into tile
position.
2. Select the desired attachments, depending on the mixing task to be performed:
 Flat beater for normal to heavy mixtures
 Dough hook for mixing and kneading yeast dough
 Whisk for mixture that need air incorporated
3. Assemble the flat beater/ dough hook/whisk into the shaft under the head;
align the rectangle groove of flat beater/dough hook/whisk with the pin on the
shaft to insert (see fig.1), then push the flat beater/dough hook/whisk upwards as
far as possible and turn it clockwise, hooking beater/dough hook/whisk over pin
on shaft.
4. When detaching, firstly push the beater/dough hook/whisk upwards and turn it
anti‐clockwise, then pull out for detaching.
Note: Ensure the flat beater/dough hook/ whisk is fully locked into the shaft,
otherwise it may drop out during operation.
5. Place bowl on position. First place the bowl on the base, then turn the bowl in
clockwise until it lock into position (see fig.2).
6. To lower the head, firstly press the tile/release button then press down the
motor head with hand directly. A click sound was heard when the head has
reached the correct position.
7. Make sure the bowl cover was in place (see fig.3).
peration
5