Sharp EM-S90-BK Instruction Manual page 7

Note: Ensure that the speed selector is at "OFF" position, before plugging in the
power source.
8. Turn the speed selector to your desired setting. There are 12 setting. Always
start with lower setting.
Warning: Do not stick knife, metal spoons, fork and so on into bowl when
operating.
9. The max. operation time per time shall not exceed 10 minutes and minimum 20
minutes rest time must be maintained between two consecutive cycles. When
kneading yeast dough, use low speed for slowing mixing, if using high speed, it
may damage the mixer.
Note: During kneading, some flour may be adhered on the inside of the bowl,
stop the appliance prior remove the bowl cover, scrape the flour at the side of
bowl by spatula to obtain well kneading results.
10. During mixing, you can add ingredient according to your task from the
opening of bowl cover.
11. When mixing is completed, turn the speed selector to "OFF" position; unplug
the appliance.
12. If necessary you can scrape the excess food particles from the beater/dough
hook by plastic spatula.
13. Before scraping, stop the Mixer and lift up the motor head.
Note: Do not scrape the bowl while the Mixer is operating. The bowl and beater
are designed to provide thorough mixing without frequent scraping. Scraping the
bowl once or twice during mixing is usually sufficient. Turn the Mixer OFF before
scraping.
Caution: The speed selector must be at "Off" position and the power outlet must
be unplugged before pulling out the beater/dough hook/whisk.
6