Software Update Guide - Stealth Cam FUSION Instruction Manual

Software Update Guide

To ensure the product is being utilized to its full potential, we recommend checking
the Stealth Cam COMMAND app for new product updates.
Over-the-Air Upgrade
• When a software update is ready, your
LEDs will alternate flashing red and
green. Press the SYNC button on your
camera to begin the upgrade.
• While update is in progress, all 3 LEDs
will flash red. Do not disturb or press
any buttons on the camera while this is
in place.
• 3 solid red lights indicate that the up-
grade is complete. Remove and reinsert
batteries to finish upgrade process.
SD Card Local Upgrade
This method will allow you to upgrade your software without the use of data.
• Clear all files from your SD card, download software upgrade from
www.stealthcamcommand.com, and insert SD card into camera.
• Camera will automatically detect new software and begin the process as defined
as above.
• If camera does not detect new software, remove SD card and verify that the only
file present on your card is the software update file.
Page 13