Dowifi For Windows - BOXLIGHT Unplug’D Quick Installation Manual

UNPLUG'D-IPro2 Quick Installation Guide

DoWiFi for Windows

1) Make sure your PC WiFi is enabled already, and connect your PC to
UNPLUG'D box through WiFi.
2) Open your browser and enter the Device Host Name (SSID) or IP address in
the browser. You can find the IP address and Host Name (SSID) on the
projector screen. (Default Host Name (SSID) is UNPLUG'D, Default IP is
192.168.100.10)
3) Download the client software for "XP/Vista/Windows 7 / 8" and install on
your PC. (You can also launch the application from PnS token directly.)
4) Launch UNPLUG'D client and connect to UNPLUG'D receiver.
(Make sure your personal firewall allows UNPLUG'D software to pass
through.)
5) Enter the CODE and you can see the Code on the projector standby screen.
6
- -