UNPLUG’D-IPro2 Quick Installation Guide 1. Package Contents UNPLUG’D Box UNPLUG’D USB Token Power Adapter (DC +5V, 2.6A) WiFi Antenna x 2 Wall-mount kit Quick Installation Guide Warranty Card 2. USB Token Contents Windows Installer (UNPLUG’D Windows Installer) ...
Page 3
UNPLUG’D-IPro2 Quick Installation Guide Front Panel Power USB Port Rear Panel VGA Connector Audio Jack HDMI RJ-45 Antenna USB Port Power Jack Antenna...
Page 4
UNPLUG’D-IPro2 Quick Installation Guide Bottom Side Screw hole Reset Button (Optional kit for Wall Mount)
UNPLUG’D-IPro2 Quick Installation Guide 4. What You Might Need Projector/Display with VGA/HDMI interface Windows or Mac PC/Laptop Apple iPhone, iPad or iPod-touch device Android Phone or Tablet device Speaker (Optional, for audio projection feature) USB Mouse and Keyboard (Optional, for remote desktop feature) ...
UNPLUG’D-IPro2 Quick Installation Guide DoWiFi for Windows 1) Make sure your PC WiFi is enabled already, and connect your PC to UNPLUG’D box through WiFi. 2) Open your browser and enter the Device Host Name (SSID) or IP address in the browser.
Page 7
UNPLUG’D-IPro2 Quick Installation Guide 6) Click the button to start full screen projection, or choose one of the numbers (1 to 4) to project to the split screen. 7) Connect the USB input devices to UNPLUG’D to select and control the PC/Mac remotely.
UNPLUG’D-IPro2 Quick Installation Guide 6. DoWiFi for Mac 1) Enable your WiFi and connect to UNPLUG’D WiFi network. 2) Open your browser and enter the Device Host Name (SSID) or IP address on browser. You can find the IP address and Host Name (SSID) on the projector screen.
Page 9
UNPLUG’D-IPro2 Quick Installation Guide 4) Launch UNPLUG’D software, connect the UNPLUG’D device and enter the Code. 5) Click the button to start full screen projection, or choose one of the numbers (1 to 4) to project to the split screen. 6) Connect the USB input devices to UNPLUG’D to select and control the PC/Mac remotely.