Table of Contents
Advertisement
Quick Links
SHINDAIWA OWNER'S/OPERATOR'S MANUAL
SPLITBOOM ATTACHMENT
SBA-TX24
Part Number 65014-94310
Rev. 2/05
WARNING!
Minimize the risk of injury to yourself and others!
Always wear eye and hearing protection when operating this unit.
Read this manual and the manual provided with the Shindaiwa
Multipurpose Engine and familiarize yourself with its contents.
Do not operate or service this machine unless you clearly
understand this manual.
Keep this manual available at all times so that it may be referred
to if questions arise regarding this unit's use.
This machine is designed for cutting grass, weed, and brush with
the Shindaiwa Multipurpose Engine.
Do not use this machine for other purposes
Advertisement
Table of Contents
Related Manuals for Shindaiwa Shindaiwa SBA-TX24
Summary of Contents for Shindaiwa Shindaiwa SBA-TX24
- Page 1 Minimize the risk of injury to yourself and others! Always wear eye and hearing protection when operating this unit. Read this manual and the manual provided with the Shindaiwa Multipurpose Engine and familiarize yourself with its contents. Do not operate or service this machine unless you clearly understand this manual.
-
Page 2: Table Of Contents
Symbol. or durability. Operating Precautions .........4 As an owner/operator, you’ll soon discover WARNING! for yourself why Shindaiwa is simply in a Product Description ........6 class by itself! A statement preceded by the trian- The procedures described in this manual gular attention symbol and the word Technical Specifications .......6... -
Page 3: Safety Precautions
Carrier, consult the owner’s manual provided Wear nonslip heavy-duty work with that unit. If it has been misplaced, con- gloves to improve your grip tact a Shindaiwa Dealer for a replacement. on this unit. Wear sturdy footwear with nonslip soles to provide good footing. Steel-toe safety boots are recommended. -
Page 4: Operating Precautions
Attachment SBA-TX24 is specifically and check for damage if you strike a from fuel tank, fuel cap, fuel tube, designed for use with a Shindaiwa foreign object or if the unit becomes and carburetor and other parts in Multipurpose Engine. Installation tangled. - Page 5 Operating Precautions (continued) Wear hearing protection devices and a broadbrimmed hat or helmet Always wear eye protection such as goggles or safety glasses. Wear close-fitting clothing to protect legs and arms Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry Always wear a strap.
-
Page 6: Product Description
Prior To Assembly IMPORTANT Before assembling, make sure you have all Using figure above as a guide, familiarize yourself with the Shindaiwa SBA-TX24 the components required for a complete The terms “left”, “left-hand”, and “LH”; unit: Splitboom Attachment and its various com- “right”, “right-hand”, and “RH”;... -
Page 7: Assembling The Splitboom
Front Handle Assembly Assembling the Splitboom Installing the Front Handle to Installing the Cutting Installing the Sub Guard the Outer Tube of the Shindaiwa Attachment Shield Multipurpose Engine WARNING! WARNING! NOTE: NEVER use this machine without sub The underside of the handle mounting barrier NEVER operate the Shindaiwa SBA- guard when using a trimmer head. -
Page 8: Installing Tool Attachment
Disassembling the Tool Installing Tool Attachment Attachment Installing a Trimmer Head 1. Place Multipurpose Engine and the 1. Place the unit on a clean, flat surface, 1. Make sure the switch is turned off and Splitboom Attachment SBA-TX24 on a loosen the coupler screw. -
Page 9: Installing A Blade
flying debris! holes (to prevent the shaft from turn- holder. ing). Use only authorized Shindaiwa parts and 5. Slide the safety clip as the illustration 9. Holding the hex wrench and the blade accessories with your Shindaiwa prod- shows. -
Page 10: Operation
Tool may be equipped with one of several 1. Hook the strap hook to the hanger on Hold the grass trimmer so the trimmer Shindaiwa trimmer head models, each with the outer pipe. head is angled slightly into the area to be features for specific applications and/or... - Page 11 Cutting With a Blade Cutting Attachments Make sure to use the following recom- (1) After starting the engine, pull CAUTION! mended Shindaiwa cutting attachments the throttle lever gradually. To prevent possible engine damage, with this machine. The engine speed increases...
-
Page 12: General Maintenance
Use only lithium- Store the unit in a clean, dust-free area. IMPORTANT! base grease such as Shindaiwa Gear Lubricate gearcase. For detailed maintenance information about Case Lubricant or equivalent. -
Page 13: Sharpening The Blade
Blade Sharpening With the file or a grinder, file a blade as follows. Make sure the width of the 3 sides/4 sides is all WARNING! the same. Sharpen only the cutting teeth of a blade. DO NOT alter the contour of the blade in any way. -
Page 14: Troubleshooting Guide
Troubleshooting Guide Additional Problems Engine idle too high. Set idle: 2,750 min Cutting attachment rotates at engine idle. Broken clutch spring or Replace spring/shoes as required, check idle speed. worn clutch spring boss. Inspect and retighten holders securely. Loose attachment holder. Inspect and replace Warped or damaged attachment. - Page 15 Notes...
- Page 16 503 692-6696 www.shindaiwa.com Shindaiwa Kogyo Co., Ltd. Head Office: 6-2-11, Ozuka-Nishi Asaminami-Ku, Hiroshima 731-3167, Japan Telephone: 81-82-849-2220 Fax: 81-82-849-2481 ©2005 Shindaiwa, Inc. Part Number 65014-94310 Revision 02/05 Shindaiwa is a registered trademark of Shindaiwa, Inc. Specifications subject to change without notice.
Need help?
Do you have a question about the Shindaiwa SBA-TX24 and is the answer not in the manual?
Questions and answers