2.3 Pair Beesecure Devices With Bee-Hub; 2.4 Set Up Bee-Hub; 2.4.1 View Devices Connected To The Hub - BeeSecure BEE-HUB User Manual

- Android user: Select BeeSecure-XXX, which the system automatically pops up,
then click Next
6. Wait until the hub has been found, select the device you want to add, click join Wi-Fi
and then Finish
On step 5, for the first time use, iOS user will be requested to input the password to connect
BEE-HUB and Wi-Fi. The password is BEESECURE. After the first time, iOS will remember the
password and no longer request to input it again.
Android phone users do not need to input the password
2.3 Pair BeeSecure Devices with BEE-HUB
After successfully connecting the BEE-HUB and Wi-Fi, you can connect your BeeSecure
device to the hub to establish the communication between them. Therefore, you can
remotely setup/view your device via the APP.
The general steps to pair BeeSecure devices and the hub are the same:
1. Tap + at top right corner of the App Home
2. Select Device from device list
3. Follow the in-app instructions to pair the device with the hub.
Please refer to the "Product Manual" of the device for detailed instructions.
During the process of pairing devices and BEE-HUB, please place the device as near as possible
to the hub. After pairing, you can install the device up to 20 meters(depending on operation
enviroment) from the hub and set it up from anywhere with your mobile.
2.4 Set up BEE-HUB
2.4.1 View Devices Connected to the Hub
There are two ways of viewing all devices connected to the selected hub:
1. Via Home Page
• Step 1: Tap the button at the left top corner to expand the view panel
• Step 2: Select "View by Hub"-> Check the Hub name; Click Confirm to proceed;
The home page will display all devices which are connected to the selected hub
2. Via Hub Page
• Step 1: Click hub from devices list at Home
• Step 2: All connected devices and their working status will be shown on the hub
page
4