Troubleshooting For Anynet - Samsung BE43R User Manual

Troubleshooting for Anynet+

Problem Possible Solution
Anynet+ does not work. •
•
•
•
•
•
•
•
•
I want to start Anynet+. •
•
I want to exit Anynet+. •
•
The message "Disconnecting •
Anynet+ device ..." appears on
•
the screen.
The Anynet+ device does not •
play.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
You can connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (initial setup)
If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn
your product off and on again.
Check if the Anynet+ function of the Anynet device is set on.
Check if the Anynet+ device is properly connected to the product and check if the
On in the System menu.
Press the TOOLS button to display the
Select View TV in the Anynet+ menu.
Press the SOURCE button on the product remote control and select a non- Anynet+ device.
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+ configuration or has finished switching to
Anynet+.
You cannot use the play function when initial setup is in progress.
On in the System menu.
Anynet+ menu and select a menu you want.
Anynet+ (HDMI-CEC) is set to
111