Outbound 081-3852-0 Operating Instructions Manual page 4

TM
ASSEMBLY INSTRUCTIONS
5. Hand tighten a 5/8" garden hose to the vacuum body.
6. Secure the hose into the hose clip. 7. Place the vacuum into the water.
5/8" hose
Hose Clip
8. Turn on the water supply, this will create a venturi action at
the vacuum body to collect debris into the vacuum bag. 9. Slowly push the vacuum body across the pool floor to remove debris.
10. When done or when the bag is full:
A) Slowly move the vacuum body to the side wall of the pool, turn the vacuum body upside-down, shut off the water and remove the vacuum body from the pool.
B) Remove the vacuum bag and discard all of the debris, flip the bag inside out and rinse with running water.
11. Repeat the vacuuming process until the pool is thoroughly cleaned.
4