Advertisement
PAGE 2 OF 2
STEP THREE
ATTACH BASS TO STRETCHER BAR WITH (4)
5/16-18 X 5/8" BOLTS AND (4) LOCK WASHERS
3
AS SHOWN. DO NOT TIGHTEN.
STEP FOUR
PULL RELEASE HANDLE TOWARDS YOU
HOLDING ONE OF THE BASES TO PREVENT
4
FROM FALLING, LAY BASES ON ITS SIDES AS
SHOWN
STEP FIVE
INSTALL (2) 5/16-18 X 2.5" BOLTS, (2) LOCK
WASHERS AND (2) WASHER PLATES AS SHOWN.
TIGHTEN ALL 6 BOLTS.
STEP SIX
RETURN BASES TO THE INITIAL POSITION.
YOU SHOULD HEAR A "CLICK." FLIP THE
TABLE OVER AND SET IT ON THE FLOOR.
ASSEMBLY INSTRUCTIONS: SLIM-TILT
270.INS.ST 614
Advertisement
