Advertisement
Quick Links
2332 Cathy Lane
Jasper, Indiana
47546
800.876.2120
812.482.9318 Fax
www.versteel.com
PAGE 1 OF 2
COMPONENTS:
QUANTITY:
SLIM TILT TOP
BASES
TOOLS REQUIRED:
ALLEN WRENCH
BOLTS AND WASHERS
(SUPPLIED BY VERSTEEL)
STEP ONE
PLACE TOP FACE DOWN ON FLAT
SURFACE OR FLOOR. BE SURE THAT THE FACE
1
IS PROTECTED WITH CARDBOARD OR FURNITURE
BLANKET.
STEP TWO
ORIENT THE BASES SO THAT TEH HOLE PATTERN
ON EACH BASE MATCHES THE HOLE PATTERN ON
2
THE CENTER STRETCHER BAR. SLIDE THE
BRACKETS ON THE BASES OVER THE BAR
Thank you for your purchase. Versteel®
hopes that you have many great years
of use from this table and from all of our
products. If you have questions that
these instructions don't answer, please
call customer service at 800.876.2120.
ASSEMBLY INSTRUCTIONS: SLIM-TILT
1
2
Advertisement
Summary of Contents for Versteel SLIM-TILT
- Page 1 Thank you for your purchase. Versteel® 2332 Cathy Lane hopes that you have many great years Jasper, Indiana of use from this table and from all of our 47546 products. If you have questions that 800.876.2120 812.482.9318 Fax these instructions don’t answer, please call customer service at 800.876.2120.
- Page 2 ASSEMBLY INSTRUCTIONS: SLIM-TILT PAGE 2 OF 2 STEP THREE ATTACH BASS TO STRETCHER BAR WITH (4) 5/16-18 X 5/8” BOLTS AND (4) LOCK WASHERS AS SHOWN. DO NOT TIGHTEN. STEP FOUR PULL RELEASE HANDLE TOWARDS YOU HOLDING ONE OF THE BASES TO PREVENT...