Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-TME4 Series
Summary of Contents for HIKVISION DS-TME4 Series
- Page 1 Entrance & Exit Station User Manual UD03949B...
- Page 2 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
- Page 3 User Manual of DS-TME4XX Series Entrance & Exit Station Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
- Page 4 User Manual of DS-TME4XX Series Entrance & Exit Station Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
- Page 5 User Manual of DS-TME4XX Series Entrance & Exit Station Improper use or replacement of the battery may result in hazard of explosion. Please use the manufacturer recommended battery type.
-
Page 6: Table Of Contents
User Manual of DS-TME4XX Series Entrance & Exit Station Table of Contents Chapter 1 Introduction ........................7 1.1 Product Overview ....................... 7 1.2 Features and Functions ...................... 7 1.3 Front Panel Introduction ....................8 Chapter 2 Connecting Peripheral Devices ................... 10 Chapter 3 Activation and Login .................... - Page 7 User Manual of DS-TME4XX Series Entrance & Exit Station 6.5.1 Configuring Alarm Input ..................36 6.5.2 Configuring Alarm Output ..................39 6.5.3 Configuring Exceptions .................... 40 Chapter 7 Configuring Entrance and Exit ................... 41 7.1 Checking Status of Entrance & Exit .................. 41 7.1.1 Checking Vehicle Status ..................
-
Page 8: Chapter 1 Introduction
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 1 Introduction 1.1 Product Overview DS-TME4XX series Entrance & Exit Station is used for data acquisition and management of entrance & exit and parking lot. Through interaction with the software, the station can control the entrance &... -
Page 9: Front Panel Introduction
User Manual of DS-TME4XX Series Entrance & Exit Station Access via WEB Alarm triggered when arming vehicle (vehicle in blacklist or owing fees) enter or illegal break-in Light on when the parking lot is full LED and voice prompt system ... - Page 10 User Manual of DS-TME4XX Series Entrance & Exit Station Table 1-2 Front Panel Description Icon Name Description LED Display Displays information such prompt, parking charge, license plate number, etc. Barrier Status Indicator Shows the open or closed status of barrier. Inductive Loops The indicator is on when the Indicator...
-
Page 11: Chapter 2 Connecting Peripheral Devices
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 2 Connecting Peripheral Devices The internal connection has been finished before the device leaves factory. Wiring is not needed for the internal connection. Contact the site operation personnel to connect the peripheral devices. Figure 2-1 Connection Interfaces Refer to the Figure 2-2 and Table 2-1 for the description of the interfaces. - Page 12 User Manual of DS-TME4XX Series Entrance & Exit Station connecting OPEN Vehicle controlling detector barrier inductive loops input Vehicle detector output Alarm input The entrance and exit station can connect other devices such as capture camera, barrier gate and entrance & exit control terminal as shown below. Notes: Barrier Gate Optical Fiber...
-
Page 13: Chapter 3 Activation And Login
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 3 Activation and Login 3.1 Activation Purpose You need to activate the device and set the password for first-time login. You can activate the device via SADP or web browser. ... - Page 14 User Manual of DS-TME4XX Series Entrance & Exit Station Figure 3-1 SADP Activation Step 2 Check the checkbox of the device for activation and the device information will be displayed on the right side. On Activate the Device interface, create a password for the device and confirm the password.
- Page 15 User Manual of DS-TME4XX Series Entrance & Exit Station STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
-
Page 16: Activating Via Web Browser
User Manual of DS-TME4XX Series Entrance & Exit Station 3.1.2 Activating via Web Browser Step 1 Modify the IP address of your computer to ensure the IP address of the computer and the device are in the same network segment. Step 2 Input the default IP address of the entrance &... - Page 17 User Manual of DS-TME4XX Series Entrance & Exit Station You are recommended to use web browser of IE 8 or above. Step 2 Input the user name and password of the entrance & exit station. Step 3 Click Login. Step 4 For the first login, you should install the plug-in before other operations. Click Please click here to download and install the plug-in.
-
Page 18: Chapter 4 Live View
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 4 Live View Purpose Click Live View to enter the Live View interface. You can control live view of the connected cameras and barrier on the interface. Figure 4-1 Live View On the Live View interface, see the following table for the functions of the interface icons. - Page 19 User Manual of DS-TME4XX Series Entrance & Exit Station Start/Stop live view of all the Start/Stop All Live View cameras. Capture Capture picture in live view. Start/Stop recording of all the Start/Stop All Recording cameras. Enable/Disable e-PTZ Enable/Disable e-PTZ function. Go for live view of the previous Prev.
-
Page 20: Chapter 5 Searching Data
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 5 Searching Data Purpose Click Data to enter the Search Data interface. You can search card and vehicle information via the configured search conditions. 5.1 Searching Card Purpose You can search card according to the Card Type and Card Status, or you can input the Card No. to search the specific card. - Page 21 User Manual of DS-TME4XX Series Entrance & Exit Station You can search vehicle according to the Vehicle Type and License Plate Color, or you can input the License Plate Number to search the specific vehicle. Step 1 Click Vehicle Search tab to enter the Vehicle Search interface. Figure 5-2 Vehicle Search Step 2 (Optional) Input the License Plate Number in the text field.
-
Page 22: Chapter 6 Configuring General Parameters
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 6 Configuring General Parameters 6.1 Configuring Local Settings Step 1 Enter the Local Configuration interface. Configuration > Local Figure 6-1 Local Configuration Step 2 Configure the Live View Parameters, Record File Settings and Picture and Clip Settings on this interface. -
Page 23: Configuring System Settings
User Manual of DS-TME4XX Series Entrance & Exit Station 7) Image Format: Select the captured picture format. JPEG and BMP are selectable. Record File Settings 1) Record File Size: 256M, 512M and 1G are selectable. It is the size of single video record file saved locally. -
Page 24: Configuring Time Settings
User Manual of DS-TME4XX Series Entrance & Exit Station Number of Channels, Number of HDDs and Number of Alarm Input depend on the actual device. 6.2.2 Configuring Time Settings Step 1 Enter the Time Settings interface. Configuration > System > System Settings > Time Settings Figure 6-3 Time Settings Step 2 Select the Time Zone. -
Page 25: Maintenance
User Manual of DS-TME4XX Series Entrance & Exit Station 3) (Optional) Check the checkbox of Sync. with computer time to synchronize the device time with the computer time. Step 4 (Optional) Configure the DST. 1) Check the checkbox of Enable DST to enable it. 2) Configure the Start Time, End Time and DST Bias. -
Page 26: Configuring Security
User Manual of DS-TME4XX Series Entrance & Exit Station 1) (Optional) Click Format to delete all the data synchronized from the control client. 2) (Optional) Click Format All to delete all the data in the database. Export Click Export to export the device parameters to the computer. ... -
Page 27: Managing Camera
User Manual of DS-TME4XX Series Entrance & Exit Station 6.2.5 Managing Camera Purpose You can view the information of analog cameras and add, modify or delete the IP cameras. Managing Analog Camera Step 1 Enter the Analog Camera management interface. Configuration >... - Page 28 User Manual of DS-TME4XX Series Entrance & Exit Station Adding IP Camera Manually 1) Click Add to enter the Add IP Camera interface. Figure 6-8 Add IP camera 2) Input the IP Camera Address, Management Port, User Name and Password of the IP camera. 3) Confirm the password.
-
Page 29: Managing User
User Manual of DS-TME4XX Series Entrance & Exit Station Modifying the Added IP Camera 1) On the IP Camera interface, check the checkbox of the camera for modifying. 2) Click Modify to enter the Modify IP Camera interface. Figure 6-10 Modify IP Camera 3) Modify the parameters including the IP Camera Address, Management Port, User Name and Password of the IP camera. - Page 30 User Manual of DS-TME4XX Series Entrance & Exit Station Figure 6-11 User Management Adding User Step 1 Click Add to enter the Add User interface. Figure 6-12 Add User Step 2 Input the User Name, select the Level as Operator or User, input the Password and confirm...
- Page 31 User Manual of DS-TME4XX Series Entrance & Exit Station STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
-
Page 32: Configuring Network
User Manual of DS-TME4XX Series Entrance & Exit Station Step 3 Click OK to save the settings. Deleting User Step 1 Select the user account for deleting. Step 2 Click Delete to delete it. You cannot delete the admin account. 6.3 Configuring Network Purpose You can configure TCP/IP, port and two-way audio for the network configuration. -
Page 33: Configuring Port
User Manual of DS-TME4XX Series Entrance & Exit Station Step 2 Configure the parameters, including the NIC Type, IPv4/IPv6 Address, IPv4/IPv6 Subnet Mask, IPv4/IPv6 Default Gateway, MAC Address and MTU. MTU refers to the maximum size of data packet in transmission. Step 3 (Optional) If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain an IP address and other network parameters. -
Page 34: Configuring Two-Way Audio
User Manual of DS-TME4XX Series Entrance & Exit Station 6.3.3 Configuring Two-Way Audio Step 1 Enter the Two-Way Audio interface. Configuration > Network > Advanced Settings > Two-way Audio Figure 6-16 Two-Way Audio Step 2 Input the IP Address and Port. Step 3 Click Save to save the settings. -
Page 35: Configuring Osd Settings
User Manual of DS-TME4XX Series Entrance & Exit Station 2) Brightness: Slide the bar to adjust brightness of the image. The value ranges from 0 to 255. 3) Contrast: Slide the bar to adjust contrast of the image. The value ranges from 0 to 255. 4) Saturation: Slide the bar to adjust color saturation of the image. -
Page 36: Configuring Privacy Mask
User Manual of DS-TME4XX Series Entrance & Exit Station 3) Select the Time Format and Date Format. 4) (Optional) Drag the text frame in the live view window to adjust the OSD position. 5) (Optional) Edit the Text Overlay. Check the checkbox(es) in front of the text field(s) to enable the on-screen display and input the characters in the text field(s). -
Page 37: Configuring Event
User Manual of DS-TME4XX Series Entrance & Exit Station Step 3 Check the checkbox of Enable Privacy Mask to enable this function. Step 4 Configure the privacy mask. 1) Click Draw Area to start drawing. 2) Hold and drag the mouse to draw the mask area in the live view window. 3) Click Stop Drawing to finish drawing. - Page 38 User Manual of DS-TME4XX Series Entrance & Exit Station Step 2 Select the Alarm Input No. and the Alarm Type from the drop-down list. The alarm type can be NO (Normally Open) and NC (Normally Closed). Step 3 (Optional) Edit the Alarm Name. Step 4 Check the checkbox of Enable Alarm Input Handling to enable the function.
- Page 39 User Manual of DS-TME4XX Series Entrance & Exit Station The time periods cannot overlap. Up to 8 periods can be configured for each day. Task 2: Configuring the Linkage Method 1) Click Linkage Method to enter the Linkage Method interface. 2) Configure the Normal Linkage, Triggered Alarm Output, Triggered Channel and PTZ Linking.
-
Page 40: Configuring Alarm Output
User Manual of DS-TME4XX Series Entrance & Exit Station Step 7 Click Save to save the settings. Alarm input settings vary with different models. 6.5.2 Configuring Alarm Output Step 1 Enter the Alarm Output interface. Configuration > Event > Basic Event > Alarm Output Figure 6-25 Alarm Output Step 2 Select the Alarm Output No. -
Page 41: Configuring Exceptions
User Manual of DS-TME4XX Series Entrance & Exit Station Step 6 (Optional) Click to copy the alarm output settings to other alarm outputs. Step 7 (Optional) Click Manual Alarm to trigger an alarm manually. Click Clear Alarm to cancel the alarm. -
Page 42: Chapter 7 Configuring Entrance And Exit
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 7 Configuring Entrance and Exit 7.1 Checking Status of Entrance & Exit 7.1.1 Checking Vehicle Status Step 1 Enter the Vehicle Status interface. Configuration > Entrance and Exit > Status > Vehicle Status Figure 7-1 Vehicle Status Step 2 Check the information including Channel No., License Plate Number, License Plate Color, Capture Time, Confidence, Upload Time and Upload Result. -
Page 43: Checking Passing Status
User Manual of DS-TME4XX Series Entrance & Exit Station Figure 7-4 Synchronization Status Step 2 Check the synchronization information including the Synchronization Mode, Synchronization Status, Start Time, End Time and Synchronization Center. 7.1.4 Checking Passing Status Step 1 Enter the Passing Status interface. Configuration >... -
Page 44: Checking System Status
User Manual of DS-TME4XX Series Entrance & Exit Station 7.1.7 Checking System Status Step 1 Enter the System Status interface. Configuration > Entrance and Exit > Status > System Status Figure 7-8 System Status Step 2 Check the system information including System Time, System Running Time, CPU Utilization and Memory Utilization. -
Page 45: Configuring Ticket
User Manual of DS-TME4XX Series Entrance & Exit Station When the inductive loops detect the passing vehicle, the UHF card reader will read the card. Check the checkbox of Contain Barrier Information to get the barrier status information if signal lines are connected to the barrier. -
Page 46: Configuring Audio
User Manual of DS-TME4XX Series Entrance & Exit Station Step 2 Input the Tile, Contact No. and Custom information to be printed on the ticket. Step 3 Select the Code Type. Barcode and QR Code are selectable. Step 4 (Optional) Check the checkbox of Print License Plate Number to print the license plate number on the ticket. -
Page 47: Configuring Barrier Settings
User Manual of DS-TME4XX Series Entrance & Exit Station Configuration > Entrance and Exit > Settings > Multi-Channel Capture Figure 7-12 Multi-Channel Capture Step 2 Check the checkbox of Multi-Channel Capture to enable the function. The capture cameras of different angles at the entrance & exit station will capture images. After enabled, the entrance &... -
Page 48: Configuring Logs
User Manual of DS-TME4XX Series Entrance & Exit Station 7.3 Configuring Logs Step 1 Enter the Log Configuration interface. Configuration > Entrance and Exit > Log Figure 7-14 Log Configuration Step 2 Check the checkbox of Enable Log to enable the function. Step 3 Configure the Log Module, Log Level, Export Log and Log Time. -
Page 49: Chapter 8 Application Of Other Models
User Manual of DS-TME4XX Series Entrance & Exit Station Chapter 8 Application of Other Models The DS-TME401-TRL entrance station and DS-TME402-TRL exit station are 1-layer card stations supporting automatic card dispatch at entrance and automatic card collection at exit. The web operations are similar to that of DS-TME401-TPL and DS-TME402-TPL ticket station. - Page 50 User Manual of DS-TME4XX Series Entrance & Exit Station Step 2 Check the checkbox of Enable to enable the offline mode. Step 3 Check the checkbox of Enable Alarm to enable alarm. Step 4 Select the entering method. Allow to enter by license plate or by card. Step 5 Input the Wait Time for Entering Standalone Mode.
- Page 51 User Manual of DS-TME4XX Series Entrance & Exit Station...