Restarting The Earbuds; Coupling The Earbuds - Samsung SM-R175 User Manual

Hide thumbs Also See for SM-R175:
Table of Contents

Advertisement

Appendix

Restarting the earbuds

If the touchpad becomes unresponsive or the earbuds do not work properly, restart the
earbuds.
To restart the earbuds, insert the earbuds into their corresponding slots in the charging case
and remove them after seven seconds or more.
If the charging case has low battery, connect the charging case to the charger first.

Coupling the earbuds

When you lose one of the earbuds, you do not have to purchase a new set of earbuds
because you can make a new set of earbuds with a newly purchased earbud and the other
earbud that you already have.
1
Check the direction of each earbud, the newly purchased earbud and previously used
earbud, and correctly insert them into their corresponding slots in the charging case.
2
Tap and hold both earbuds' touchpads for seven seconds or more.
The earbud battery indicator light will flash green and turn off. Then, the earbuds are
coupled.
The earbud battery indicator light will keep flashing red when the earbuds are not
coupled properly. Remove the earbuds from the charging case and insert them again.
Then, tap and hold both earbuds' touchpads for seven seconds or more.
3
Connect the earbuds to a mobile device. For more information, refer to
earbuds to a mobile
device.
45
Connecting the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Buds+

Table of Contents